Tato stránka je k dispozici pouze v English

News and stories

Vše

17 pro 2018 , News

The search for an identifier that can trace steel throughout its value chain has kept researchers busy for many years. Extreme heat, mechanical processing, deformation and corrosion are some of the harsh environments that an identifier has to withstand. To find a solution, Sandvik and SSAB invited researchers, companies and institutes around the world for an innovation challenge.

15 lis 2018 , News

Congratulations to Bharat Energy Storage Technology (BEST), winner of Kanthal® Award 2018. The Indian start-up company was awarded for their pioneering work in sustainable energy technologies.

13 lis 2018 , Press release

Increased AM capacity, industrial AM cases and market-leading OspreyTM metal powder range to be showcased at Formnext 2018

12 lis 2018 , Press release

The company also continues to observe growth in Europe, the Middle East and Africa.

EMEA, 8 November 2018 – Sandvik, a developer and producer of advanced stainless steels, special alloys, titanium and other high-performance materials, will highlight its latest range of products and services for its growing EMEA customer base at the Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC) 2018 next week.

9 lis 2018 , Press release

Sandvik, the leading medical wire specialist, is stepping up focus on customizable wire solutions for sensing and stimulation based on EXERA™ high precision medical wire at Compamed 2018, Messe Düsseldorf, 12-15 November. Hall 8A, booth no. S29.

1 lis 2018 , News

Sandvik has announced that TW Metals UK will be a preferred distributor for a range of products including Sandvik hydraulic & instrumentation tubing and high temperature piping products in England.

25 říj 2018 , News

A new research project named Swedish Metal is about to kick off, where Sandvik is participating together with SSAB and the University of Skövde. By using Artificial Intelligence, Big Data and machine learning unique and comprehensive production data analyses will be made. These analyses will hopefully show new cause-and-effect relationships – which can lead to more efficient and sustainable steelmaking processes.

Novinky

17 pro 2018 , News

The search for an identifier that can trace steel throughout its value chain has kept researchers busy for many years. Extreme heat, mechanical processing, deformation and corrosion are some of the harsh environments that an identifier has to withstand. To find a solution, Sandvik and SSAB invited researchers, companies and institutes around the world for an innovation challenge.

15 lis 2018 , News

Congratulations to Bharat Energy Storage Technology (BEST), winner of Kanthal® Award 2018. The Indian start-up company was awarded for their pioneering work in sustainable energy technologies.

1 lis 2018 , News

Sandvik has announced that TW Metals UK will be a preferred distributor for a range of products including Sandvik hydraulic & instrumentation tubing and high temperature piping products in England.

25 říj 2018 , News

A new research project named Swedish Metal is about to kick off, where Sandvik is participating together with SSAB and the University of Skövde. By using Artificial Intelligence, Big Data and machine learning unique and comprehensive production data analyses will be made. These analyses will hopefully show new cause-and-effect relationships – which can lead to more efficient and sustainable steelmaking processes.

25 říj 2018 , News

Recent developments and discoveries in the offshore Eastern Mediterranean gas industry, specifically the Levant Basin, are providing significant opportunities for companies that can offer products capable of withstanding harsh environments.

19 říj 2018 , News

Sandvik hosted a technical day at our Milan headquarters, with a focus on heat exchangers. The event presented the perfect opportunity to meet with customers and people working in various industries including refineries inspection, maintenance and engineering.

17 říj 2018 , News

Come and see us at ADIPEC 2018, stand #3220, Abu Dhabi National Exhibition Centre Hall 3, and let’s discuss how we can add value to your business through purposeful innovation.

19 zář 2018 , News

What’s your view of the Brazilian market? Come and tell us at Rio Oil & Gas stand J36, pavilion 4, September 24 to 27. We’ll be featuring our range of corrosion-resistant materials and technology including control lines, umbilical tubing, OCTG, and more on our booth at Rio Oil & Gas.

Tiskové zprávy

13 lis 2018 , Press release

Increased AM capacity, industrial AM cases and market-leading OspreyTM metal powder range to be showcased at Formnext 2018

12 lis 2018 , Press release

The company also continues to observe growth in Europe, the Middle East and Africa.

EMEA, 8 November 2018 – Sandvik, a developer and producer of advanced stainless steels, special alloys, titanium and other high-performance materials, will highlight its latest range of products and services for its growing EMEA customer base at the Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC) 2018 next week.

9 lis 2018 , Press release

Sandvik, the leading medical wire specialist, is stepping up focus on customizable wire solutions for sensing and stimulation based on EXERA™ high precision medical wire at Compamed 2018, Messe Düsseldorf, 12-15 November. Hall 8A, booth no. S29.

24 říj 2018 , Press release

Sandvik and Jiuli Hi-Tech Metals are entering into a partnership for the supply of Sanicro® 25 high alloy, austenitic stainless-steel tube to specifically target the expanding market for low emission coal fired power generation.

21 zář 2018 , Press release

A ‘Track and Trace’ service app that keep tabs on orders, from just before shipping through to delivery, has been launched by Sandvik. The app is a useful tool for the customer to free up time in their day-to-day purchasing operations.

14 zář 2018 , Press release

Sandvik will be exhibiting at the World Congress on Powder Metallurgy in Beijing 16 – 20 September.

3 zář 2018 , Press release

Sandvik’s business area Sandvik Materials Technology has secured several orders for advanced tubes related to the oil and gas industry.

Články

11 říj 2018 , Feature

There’s a high degree of optimism that the African oil and gas industry will see significant growth in the next few years as an increasing number of discoveries are identified and exploited.

2 říj 2018 , Feature
Razor blade explainer

Looking for that perfect shave; sharp and accurate, yet smooth and gentle, with a razor blade that’s durable and doesn’t corrode? When you find that brilliant razor, the blade might very well be produced by Sandvik. And guess what – more than 80% of the steel that Sandvik delivers to razor blade manufacturers around the world is recycled; from old bridges, sinks, bikes and railway rails just to mention a few ingredients.

19 čvn 2018 , Feature

At Sandvik, we live and breathe industrial innovation. We search for smart solutions to some of the greatest material challenges, constantly exploring new ground to find more sustainable ways to use and produce resources.

23 bře 2018 , Feature

From the few examples mentioned in this column, new methods of generating electricity will also require new materials solutions to deal with the environments they will work in.

14 úno 2018 , Feature

Sandvik is a world-leading producer of metal powder with over 35 years’ experience in the area. Keith Murray is Business Development Manager for metal powder at business area Sandvik Materials Technology.

20 pro 2017 , Feature

Sandvik has approximately 8,000 active patents and 2,700 engineers working at research centers all over the world. One of the most prominent research centers is in Sandviken, Sweden.

13 pro 2017 , Feature

Sandvik Materials Technology’s gas atomized metal powders help facilitate a wide range of customer applications including metal injection molding (MIM) and additive manufacturing (3D printing). Indo-MIM, a supplier of precision-engineered products, has gained a competitive edge with high quality molds manufactured using Sandvik's metal powder Osprey®.

2 srp 2017 , Feature

The coefficient in front of tungsten compensates for the fact that the atomic weight of tungsten is about twice that of molybdenum. Molybdenum has been used from the very beginning in DSS. It was used in 453S launched by Avesta Jernverk in 1930 and has been used in virtually all DSS ever since. However, it was not until the 1980’s when Sumitomo launched DP3 and Weir launched Zeron 100 that tungsten was used more systematically as an alloying element.

News archive