Produkty

Sandvik Materials Technology nabízí široký sortiment výrobků vysoce konstrukčně zpracovaných, založených na integrované výrobní základně a rozsáhlém výzkumu a vývoji, stejně jako výrobků vysoce kvalitních.

Product groups

Tyče a lupa

  • tyčovina
  • dobře obrobitelná ocel
  • duté tyče
  • tyčovina pro vrtný průmysl

Sochory a ocelové bloky

Kované sochory, válcované sochory, ingoty, kontislitky

Výrobky ze slitin CE

Výrobky vyrobené ze slitin s řízenou tepelnou roztažností, tzv. CE (controlled expansion) slitiny

Výrobky pro pece a topné systémy

Výrobky pro pece, zařízení pro tepelné zpracování a topné systémy.

Izostatické lisované produkty

Výrobky blízké konečnému tvaru vyrobené práškovou metalurgií izostatickým lisováním.

Kovový prášek

Plynem naprašované kovové prášky

Pláty a desky

Pláty, desky a svitky.

Pásová ocel

Přesná pásová ocel

Trubky, tvarovky a příruby

Bezešvé a svařované trubky a potrubí, tvarovky a příruby.

Drát

Kulatý drát

Services

A range of technical services based on our materials and applications knowledge and manufacturing expertise.

Services

Are you experiencing material problems in your equipment that you need to solve, or are you looking for a new solution? Do you need support from idea generation to full-scale manufacture or just a second opinion? Whether you are looking for a partner, special equipment, R&D capability or engineering competence, please contact us. Our offering is based on 150 years of research, development and manufacturing experience.

Need to know more?

Contact us

Life cycle assessments

Material datasheets

318 hits

Sanmac 4571 Product form:Bar

Standard:UNS S31635 | ASTM 316Ti | EN number 1.4571

A titanium-stabilized, molybdenum-alloyed austenitic stainless steel with improved machinability.

Download as PDF Send PDF via email

Sandvik High-N Product form:Bar

Standard:UNS S31675

A nitrogen-alloyed, austenitic stainless steel with high corrosion resistance and microcleanliness. The grade is part of the Sandvik medical materials range.

Download as PDF Send PDF via email

Sandvik 19.12.3.L T0 Product form:Flux cored wire electrodes

Standard:

Sandvik 19.12.3.L T0 (Sandvik 316/316L) is a chromium-nickel-molybdenum flux core electrode for welding of low carbon 18% Cr/10% Ni/ 2%Mo austenitic stainless steels of type 316.

Download as PDF Send PDF via email

Sanicro® 71 Product form:Covered electrodes

Standard:

A covered electrode with basic coating for welding of dissimilar joints of stainless steel and nickel alloys as well as welding of NiCrFe alloys and 9% Ni steels.

Download as PDF Send PDF via email

Sanicro® 69 (Several product forms available)

UNS N06690

A covered electrode with basic coating for corrosion-resistant overlays on most low-alloy and stainless steels. It is also used for welding of alloys of Alloy 690 type (e.g. Sanicro 69) and dissimilar joints.

Download as PDF

Several product forms available:

Send PDF via email

Several product forms available:

Sandvik 27.31.4.LCuR-16 Product form:Covered electrodes

Standard:

A covered electrode of AWS 383-16 type with rutile-basic coating for welding of high-alloy austenitic stainless steels of UNS S08028 (e.g. Sanicro 28) and Alloy 825 type (e.g. Sanicro 41).

Download as PDF Send PDF via email

Sanbar® 61 Product form:Hollow drill steel

Standard:

Sanbar® 61 is a high strength silicon steel with good toughness and impact resistance in the as-rolled condition.

Download as PDF Send PDF via email

Sandvik Formula Green Product form:Weld finishing

Standard:

Sandvik Formula Green is an effective multipurpose pickling paste, virtually free from formation of toxic nitric gases, used for post-weld treatment of stainless steel welds. Stainless steels are pickled in order to refurbish the weld's surface finish by removing welding oxide, heat tint or scale formed during fabrication.

Download as PDF Send PDF via email

Sandvik Root Flux Product form:Weld finishing

Standard:

Sandvik Root Flux is applied to the root side before welding and protects against oxidation, which occurs during welding. The root flux has been specially developed for use with GTAW welding of low-alloy and stainless steel with a maximum 25% nickel content but is also suitable for other welding methods.

Download as PDF Send PDF via email

Sandvik 24.13.LR-16 Product form:Covered electrodes

Standard:

Sandvik 24.13.LR-16 (309/309L-16) is a covered chromium-nickel electrode with rutile-basic coating used for first-layer overlay welding of carbon or low-alloy steels. The low carbon content reduces the susceptibility to intergranular carbide precipitation and intergranular corrosion. It is also used for joining of dissimilar material. The coating for this electrode is of the American rutile type with a faster freezing rate over -17 Type of the same weld deposit chemistry.

Download as PDF Send PDF via email

Go to page: Previous , 1 , … , 4 , 5 , 6 , 7(This page) , 8 , 9 , 10 , … , 32 Next