Materialedatablade

Her kan du få adgang til materialedatablade for vores store udvalg af legeringer og materialer. Kontakt os, hvis du ønsker yderligere oplysninger om vores materialer.

194 hits

Sandvik Ti Grade 7 Produktformular:Tube and pipe, seamless

Standard:UNS R52400 | ASTM Grade 7

An unalloyed titanium grade with standard oxygen content and addition of palladium (0.12–0.25%).

Download som PDF Send PDF via e-mail

Sandvik Zr 702 Produktformular:Tube and pipe, seamless

Standard:UNS R 60702

A zirconium grade characterized by immunity to stress corrosion cracking and high resistance to pitting and crevice corrosion. The grade has very good corrosion resistance in, for example, several types of acids and moderate mechanical strength.

Download som PDF Send PDF via e-mail

Sanicro® 69 Produktformular:Tube and pipe, seamless

Standard:UNS N06690

An austenitic nickel-chromium-iron (NiCrFe) alloy used primarily for steam generators in nuclear power plants (PWR). The grade is also suitable for use in caustic environments and nitric acid.

Download som PDF Send PDF via e-mail

Pressurfect® CNG Produktformular:Tube and pipe, seamless

Standard:UNS S31603, S31600 | ASTM TP316L, TP316 | EN number 1.4435, 1.4436

An austenitic stainless steel with a low carbon content alloyed with min. 2.5% molybdenum.

Download som PDF Send PDF via e-mail

Sanicro® 29 Produktformular:Tube and pipe, seamless

Standard:UNS N08029 | ASTM B668-05

Sanicro® 29 is a high-alloy austenitic stainless steel for service in highly corrosive conditions. Sanicro® 29 was originally developed as an alternative to Sanicro® 28, with improved localized corrosion resistance where the environment contains high chloride concentrations. With the addition of molybdenum the PRE (Pitting Resistance Equivalent) has been increased from ≥38 for Sanicro® 28, to ≥42.

Download som PDF Send PDF via e-mail

Bond XTC Produktformular:Wire insulations and coatings

Standard:

A high-temperature thermoplastic polyamide bondcoat.

Download som PDF Send PDF via e-mail

Bond TT Produktformular:Wire insulations and coatings

Standard:

Bond TT is a high temperature thermoplastic polyamide bondcoat, that exhibits good bond strength after activation with heat at 170-180°C. Bond TT can also be activated with solvent. This allows windings that maintain their shape until permanently bonded with heat. The recommended solvent for activation of this material is isopropyl alcohol.

Download som PDF Send PDF via e-mail

Bond XTS Produktformular:Wire insulations and coatings

Standard:

A high-temperature thermoset epoxy bondcoat.

Download som PDF Send PDF via e-mail

Tri-2-sod Produktformular:Wire insulations and coatings

Standard:

A class H modified polyester resin.

Download som PDF Send PDF via e-mail

Bond CJL Produktformular:Wire insulations and coatings

Standard:

Bond CJL is a high temperature thermoplastic polyester bondcoat, that exhibits good bond strength after activation with heat at 170-190°C. Bond CJL can also be activated with solvent. This allows windings that maintain their shape until permanently bonded with heat. The recommended solvents for activation of this material are acetone or methyl ethyl ketone.

Download som PDF Send PDF via e-mail

Gå til side: Forrige , 1 , … , 12 , 13 , 14 , 15(denne side) , 16 , 17 , 18 , … , 20 Næste