Werkstoffart
Alle Werkstoffarten
Austenitic stainless steels
Carbon steels
Cobalt-chromium alloys
Corrosion resistant alloys
Creep resisting alloys
Cryogenic
Duplex stainless steels
Elastic materials
Ferritic stainless steels
Free-cutting steels
Heat resisting alloys
High-purity alloys
High-temperature alloys
Hyper-duplex stainless steels
Lean duplex stainless steels
Machinability-improved steels
Martensitic stainless steels
Nickel alloys
Non-ferrous metals
Precipitation hardening alloys
Refractory metals
Stainless steels
Super-duplex stainless steels
Titanium grades
Vacuum arc remelting
Zirconium grades
Produktform
Alle Produktformen
Bar and hollow bar
Billets
Strip steel
Tube and pipe, seamless
Wire
Wire insulations and coatings
Haupteigenschaft
Acetic acid general corrosion
Air oxidation resistance
Bending fatigue strength
Carburizing resistance
Corrosion fatigue
Creep strength
Crevice corrosion resistance
Cryogenic compability
Ductility
Edge properties
Elasticity
Erosion corrosion resistance
Formic acid general corrosion
General corrosion resistance
High strength
Impact fatigue strength
Impact strength
Low thermal expansion
Nitric acid general corrosion
Nitriding resistance
Pitting and crevice corrosion resistance
SCC resistance
SCC resistance in chloride environments
SCC resistance in H2S/Cl- environments
Soft magnetic properties
Spring properties
Sulphidation resistance
Sulphuric acid general corrosion
194 hits
Sortieren nach
Sortieren nach Relevanz
Sortieren nach ASTM
Sortieren nach EN no.
Sortieren nach UNS
Sortieren
SAF 2507® (Mehrere Produktformen erhältlich)UNS S32750 | EN number 1.4410
SAF 2507® is a high alloy super duplex (austenitic-ferritic) stainless steel for service in highly corrosive conditions.
Sanmac® 2205 (Mehrere Produktformen erhältlich)UNS S31803, S32205 | EN number 1.4462
A machinability-improved duplex (austenitic-ferritic) stainless steel characterized by high resistance to stress corrosion cracking, high resistance to pitting, crevice and general corrosion and very high mechanical strength.
Sanicro® 28 (Mehrere Produktformen erhältlich)UNS N08028 | EN number 1.4563
A high-alloy austenitic stainless steel characterized by very high corrosion resistance in strong acids, very good resistance to stress corrosion cracking and intergranular corrosion as well as high resistance to pitting and crevice corrosion.
Standard: ASTM 420F Mod
A hardenable stainless chromium steel characterized by very good machinability. It has high hardness and high wear resistance after hardening. The grade is part of the Exera® medical materials range.
Standard: EN number 1.4310
An austenitic stainless steel of ASTM 301 type with addition of molybdenum. The grade is characterized by high tensile strength and high resistance to corrosion, fatigue and relaxation. Sandvik 11R51 (EN No. 1.4310) is typically used for demanding spring applications.
Sandvik 12C27™ (Mehrere Produktformen erhältlich)UNS S42000 | ASTM (420), (440A), 420
A martensitic stainless chromium steel which after hardening is characterized by very high hardness and wear resistance and good corrosion resistance. Sandvik 12C27 is typically used for knives and skate blades.
Standard: UNS S42026 | EN number (1.4031)*
A hardened and tempered martensitic stainless steel alloyed with molybdenum. Sandvik 7C27Mo2 flapper valve steel is characterized by very high fatigue strength, good flatness and wear resistance.
Standard: UNS S32205, S31803 | EN number 1.4462
Sandvik Springflex™ is a duplex (austenitic-ferritic) stainless spring steel with very good spring properties and excellent corrosion resistance.
Standard:
Sandvik 10C28Mo2 is a martensitic stainless chromium steel developed for razor blade and knife applications with high demands on corrosion resistance. The carefully chosen chemical composition in combination with a very fine microstructure also provides a high hardness, good edge retention, toughness and edges that are easy to re-sharpen.
Sandvik 4C54 (Mehrere Produktformen erhältlich)UNS S44600 | ASTM 446-1 | EN number 1.4749
A ferritic chromium steel for high-temperature applications. The grade is characterized by excellent resistance to sulphidation in reducing atmospheres and very good resistance to oxidation.
