Diese Seite ist nur in den folgenden Sprachen verfügbar: English

News and stories

Alle

27 Jun 2019 , News

By supplying the aerospace industry with materials that are so light and strong that they can literally be described as out of this world, Sandvik is helping humanity explore the edges of the planet and makes air travel more sustainable.

19 Jun 2019 , News

Since mid-May, all internal vehicles at the Sandvik industrial area in Sandviken are refueled with biofuel HVO100* instead of diesel. This change reduces our carbon dioxide emissions from internal transport by as much as 92% or 2,200 tons.

14 Jun 2019 , Sonderbeitrag

The global offshore industry is welcoming a return to confidence. In Asia Pacific specifically, an increase in demand for hydrocarbons, improvements in technology and more cost-efficient working practices have led to a greater interest in extreme deep and ultra deepwater plays. As a result, several projects in extreme locations that had previously been shelved or abandoned due to cost constraints are now reaching the final investment decision stage.

27 Mai 2019 , Pressemitteilung

To facilitate fast-track information sharing, Sandvik is launching a new self-service online platform that will allow customers to access information regarding round bar, hollow bar, pipe, flanges and fittings.

14 Mai 2019 , Pressemitteilung

Sandvik, the leading medical wire specialist, is stepping up focus on customizable wire solutions for sensing and stimulation based on EXERA™ high precision medical wire at CMEF, National Convention & Exhibition Center, Shanghai, China 14-17 May 2019.

3 Mai 2019 , News

To develop the materials that customers and society will demand tomorrow, we need material science. With its world leading materials expertise, Sandvik is well positioned to help create tomorrow’s world.

26 Apr 2019 , Sonderbeitrag

Corrosion Resistant Alloy (CRA) pipes like Sandvik’s SAF 2507® have traditionally been run in singles because the threaded connections exhibit a higher tendency to galling and require a more careful make-up compared to carbon steel pipes.

26 Apr 2019 , News

Say hello to the world’s lightest and strongest construction ever. The Isotropic Lightweight Structure (ILS) relies on Sandvik’s hyper duplex material and presents endless possibilities wherever there is a need for strength, lightness and anti-corrosive properties.

News

27 Jun 2019 , News

By supplying the aerospace industry with materials that are so light and strong that they can literally be described as out of this world, Sandvik is helping humanity explore the edges of the planet and makes air travel more sustainable.

19 Jun 2019 , News

Since mid-May, all internal vehicles at the Sandvik industrial area in Sandviken are refueled with biofuel HVO100* instead of diesel. This change reduces our carbon dioxide emissions from internal transport by as much as 92% or 2,200 tons.

3 Mai 2019 , News

To develop the materials that customers and society will demand tomorrow, we need material science. With its world leading materials expertise, Sandvik is well positioned to help create tomorrow’s world.

26 Apr 2019 , News

Say hello to the world’s lightest and strongest construction ever. The Isotropic Lightweight Structure (ILS) relies on Sandvik’s hyper duplex material and presents endless possibilities wherever there is a need for strength, lightness and anti-corrosive properties.

20 Mrz 2019 , News

The upcoming NACE International’s Corrosion Conference & Expo is the world’s largest event for the prevention and mitigation of corrosion. Sandvik will of course be present as one of the over 6,000 corrosion professionals from all around the world.

7 Mrz 2019 , News

Sandvik has been ‘creating a buzz’ at its high-pressure tubing manufacturing facility in Werther, Germany, with the installation of a colony of bees at the site.

26 Feb 2019 , News

Sandvik and award winning premium knife producer Cangshan Cutlery Co. have initiated a partnership with the ambition of making innovative knives for the next generation. The knives are made from high alloy Sandvik®14C28N steel, which is the latest development in the range of knife steels.

20 Feb 2019 , News

Calibration blocks in grade Sandvik SAF™ 2507 and Sanicro® 69 (alloy 690) are available in stock, while other grades and types are ordered upon request.

Pressemitteilungen

27 Mai 2019 , Pressemitteilung

To facilitate fast-track information sharing, Sandvik is launching a new self-service online platform that will allow customers to access information regarding round bar, hollow bar, pipe, flanges and fittings.

14 Mai 2019 , Pressemitteilung

Sandvik, the leading medical wire specialist, is stepping up focus on customizable wire solutions for sensing and stimulation based on EXERA™ high precision medical wire at CMEF, National Convention & Exhibition Center, Shanghai, China 14-17 May 2019.

13 Mrz 2019 , Pressemitteilung

Sandvik’s Mehsana production unit in India has received approval from the Kuwait National Petroleum Company (KNPC) for the supply of its product Category 12.20: tubes, heat exchangers, stainless steel and alloy steel to its refineries.

19 Feb 2019 , Pressemitteilung

Set to take centre stage at the Sandvik booth at this year’s Nitrogen + Syngas conference and exhibition, is the renowned Safurex® brand. The range has now been expanded to include, Safurex® Star* which will be on show for the duration of the event.

21 Jan 2019 , Pressemitteilung

Sandvik Materials Technology has received several orders for advanced tubes for the oil and gas industry at a combined value of about 1 billion SEK, with the majority being umbilical tubes.

13 Nov 2018 , Pressemitteilung

Increased AM capacity, industrial AM cases and market-leading OspreyTM metal powder range to be showcased at Formnext 2018

12 Nov 2018 , Pressemitteilung

Sandvik will highlight its latest range of products and services for its growing EMEA customer base at the Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC) 2018.

9 Nov 2018 , Pressemitteilung

Sandvik, the leading medical wire specialist, is stepping up focus on customizable wire solutions for sensing and stimulation based on EXERA™ high precision medical wire at Compamed 2018, Messe Düsseldorf, 12-15 November. Hall 8A, booth no. S29.

Sonderbeiträge

14 Jun 2019 , Sonderbeitrag

The global offshore industry is welcoming a return to confidence. In Asia Pacific specifically, an increase in demand for hydrocarbons, improvements in technology and more cost-efficient working practices have led to a greater interest in extreme deep and ultra deepwater plays. As a result, several projects in extreme locations that had previously been shelved or abandoned due to cost constraints are now reaching the final investment decision stage.

26 Apr 2019 , Sonderbeitrag

Corrosion Resistant Alloy (CRA) pipes like Sandvik’s SAF 2507® have traditionally been run in singles because the threaded connections exhibit a higher tendency to galling and require a more careful make-up compared to carbon steel pipes.

12 Apr 2019 , Sonderbeitrag

The recent Subsea Tieback forum and exhibition in San Antonio, TX, USA, provided a clear indication that confidence in global deepwater activity is returning - and demand in the subsea supply chain is stable and rising.

11 Okt 2018 , Sonderbeitrag

There’s a high degree of optimism that the African oil and gas industry will see significant growth in the next few years as an increasing number of discoveries are identified and exploited.

2 Okt 2018 , Sonderbeitrag
Razor blade explainer

Looking for that perfect shave; sharp and accurate, yet smooth and gentle, with a razor blade that’s durable and doesn’t corrode? When you find that brilliant razor, the blade might very well be produced by Sandvik. And guess what – more than 80% of the steel that Sandvik delivers to razor blade manufacturers around the world is recycled; from old bridges, sinks, bikes and railway rails just to mention a few ingredients.

19 Jun 2018 , Sonderbeitrag

Wir von Sandvik leben für industrielle Innovationen. Wir suchen nach intelligenten Lösungen für einige der größten Herausforderungen in der Werkstofftechnik und suchen ständig nach neuen Möglichkeiten, um nachhaltigere Wege zur Nutzung und Produktion von Ressourcen zu finden.

14 Feb 2018 , Sonderbeitrag

Sandvik is a world-leading producer of metal powder with over 35 years’ experience in the area. Keith Murray is Business Development Manager for metal powder at business area Sandvik Materials Technology.

20 Dez 2017 , Sonderbeitrag

Sandvik has approximately 8,000 active patents and 2,700 engineers working at research centers all over the world. One of the most prominent research centers is in Sandviken, Sweden.

News archive