Here you can access material datasheets for our wide range of alloys and materials. Contact us if you need more information about our materials.
A Polyamide-imide insulation.
Bond CJL is a high temperature thermoplastic polyester bondcoat, that exhibits good bond strength after activation with heat at 170-190°C. Bond CJL can also be activated with solvent. This allows windings that maintain their shape until permanently bonded with heat. The recommended solvents for activation of this material are acetone or methyl ethyl ketone.
A thermoplastic modified epoxy bondcoat.
A thermoplastic polyamide.
Bond TT is a high temperature thermoplastic polyamide bondcoat, that exhibits good bond strength after activation with heat at 170-180°C. Bond TT can also be activated with solvent. This allows windings that maintain their shape until permanently bonded with heat. The recommended solvent for activation of this material is isopropyl alcohol.
A high-temperature thermoplastic polyamide bondcoat.
A high-temperature thermoset epoxy bondcoat.
A thermoplastic polyvinylbutyral.
Standard:UNS S21500 | EN number 1.4982
An austenitic chromium-nickel steel for high-temperature applications. The grade is characterized by very good resistance to steam and flue gas atmospheres and commonly used in boiler applications.
Standard:UNS S30400, S30403 | ASTM 304, 304L | EN number 1.4301, 1.4306
An austenitic stainless steel. The grades are part of the Exera® medical materials range.
Go to page:
Sandvik is an engineering group in materials technology, metal-cutting, and mining and rock excavation.Visit Sandvik Group's website
Copyright © Sandvik AB; (publ)SE-811 81 Sandviken, SwedenPhone: +46 26 26 00 00