You are visiting:
Sandvik Materials Technology
Here you can access material datasheets for our wide range of alloys and materials. Contact us if you need more information about our materials.
Standard:UNS R50250 | ASTM Grade 1
An unalloyed titanium grade with low oxygen content.
Standard:UNS S32750 | EN number 1.4410
A super-duplex (austenitic-ferritic) stainless steel characterized by excellent resistance to stress corrosion cracking, very high resistance to pitting and crevice corrosion, high resistance to general corrosion and very high mechanical strength.
View datasheet for:
UNS N08810/N08811 | EN number 1.4959, 1.4959/1.4876
An austenitic nickel-iron-chromium steel for high-temperature applications. The grade is characterized by high creep strength, very good resistance to oxidation, carburization and good resistance to nitrogen absorption.
Several product forms available:
Standard:UNS R52400 | ASTM Grade 7
An unalloyed titanium grade with standard oxygen content and addition of palladium (0.12–0.25%).
Sandvik SX is a high silicon containing austenitic stainless steel developed for use in concentrated sulfuric acid. The grade is characterized by:
Sandvik 19.9.LR-16 (Sandvik 308/308L-16) is a covered chromium-nickel electrode with rutile-basic coating for welding of steels of ASTM 304 types as well as overlays giving 308 type composition.
Sandvik Formula Green is an effective multipurpose pickling paste, virtually free from formation of toxic nitric gases, used for post-weld treatment of stainless steel welds. Stainless steels are pickled in order to refurbish the weld's surface finish by removing welding oxide, heat tint or scale formed during fabrication.
Sandvik Root Flux is applied to the root side before welding and protects against oxidation, which occurs during welding. The root flux has been specially developed for use with GTAW welding of low-alloy and stainless steel with a maximum 25% nickel content but is also suitable for other welding methods.
Sandvik 19.9.R-16 (308/308H-16) is a covered chromium-nickel electrode with rutile-basic coating for welding of steels of ASTM 304 types as well as overlays giving 308 type composition. This electrode has the same composition as type 308 except the carbon restriction eliminates carbon content below 0.04%. Carbon content in the range 0.04-0.08 facilitates higher tensile and creep strengths at elevated temperatures. The coating for this electrode is of the American rutile type with a faster freezing rate over -17 Type of the same weld deposit chemistry.
Sandvik 24.13.LR-16 (309/309L-16) is a covered chromium-nickel electrode with rutile-basic coating used for first-layer overlay welding of carbon or low-alloy steels. The low carbon content reduces the susceptibility to intergranular carbide precipitation and intergranular corrosion. It is also used for joining of dissimilar material. The coating for this electrode is of the American rutile type with a faster freezing rate over -17 Type of the same weld deposit chemistry.
Go to page:
Sandvik is an engineering group in materials technology, metal-cutting, and mining and rock excavation.Visit Sandvik Group's website
Copyright © Sandvik AB; (publ)SE-811 81 Sandviken, SwedenPhone: +46 26 26 00 00