Here you can access material datasheets for our wide range of alloys and materials. Contact us if you need more information about our materials.
Isomid is a Thermal Class 200, THEIC modified, polyesterimide wire enamel that meets the requirements of NEMA MW1000, MW30 or MW74 when applied as a basecoat, MW76 (when applied with a Nylon topcoat), and MW35 or MW73 (when applied with an Aminide topcoat). Topcoat applications serve the purpose of reducing coefficient of friction during winding/insertion.
A modified polyester resin with additional Nylon overcoat.
A fast running, general purpose, Class 155 polyurethane enamel.
A polyurethane wire enamel with additional Polyamide overcoat.
An enamel is made from vinyl acetal resins.
A high-temperature thermoset epoxy bondcoat.
Sandvik 21-6-9 is an austenitic grade with a high level of Mn, a low level of Ni and the addition of N. The grade is characterized by:
Sanicro® 35 is an alloy combining the best features of a super austenitic stainless steel and a nickel alloy. The grade has excellent corrosion resistance, for service in sea-water applications and other highly corrosive environments.
Aromatic polyether-based thermoplastic polyurethanes (TPUs) are unique resins which exhibit excellent solvent resistance and biostability. We have developed processing techniques to allow the application of this material on our alloy offerings and it can be applied at thicknesses as thin as 2.5 microns.
Sulfone polymers are high-heat plastics with a clear advantage. These amorphous thermoplastics offer more toughness, strength and hydrolytic stability than many other transparent plastics. They withstand prolonged exposure to water, chemicals and temperatures – handling a broad range of end-use temperatures from -40°C to 204°C (-40°F to 400°F).
Go to page:
Sandvik is an engineering group in materials technology, metal-cutting, and mining and rock excavation.Visit Sandvik Group's website
Copyright © Sandvik AB; (publ)SE-811 81 Sandviken, SwedenPhone: +46 26 426 00 00