03. Duplex stainless steels- an interplay between ferrite and austenite
Number three in a series of eight columns throughout 2017 on the topic of the seven families of stainless steels; their characteristics, complementary properties and the wide variety of applications from the smallest of items destined for the human body to large scale constructions in the process industry. This month features duplex stainless steels which combine the properties of austenite with the properties of ferrite.
Duplex stainless steels (DSS) combine the properties of austenite with the properties of ferrite. While austenite is very sensitive to stress corrosion cracking ferrite is almost insensitive. Ferrite is rather brittle while austenite is tough. Work hardening is much less pronounced in ferrite than in austenite owing to the difference in atomic structure. Ferritic stainless steels are difficult to weld while austenitic stainless steels are readily welded. Combining ferrite and austenite of complementary properties results in a steel with a ferritic-austenitic or duplex microstructure (Figure 1) and entirely new properties. Some of these are the obvious results of a mixture of two phases.
However, as I emphasized in a previous column, there is sometimes a synergistic interaction leading to surprising properties that cannot be predicted from the properties of the constituents alone. The stress corrosion resistance and the mechanical strength are two examples of such synergism. Despite the fact that austenite is sensitive to stress corrosion the duplex structure is almost immune. This has been explained by the fact that the conditions for stress corrosion cannot be fulfilled in both phases simultaneously. Moreover, the mechanical strength is typically twice that of the constituents mainly because of the small effective grain size, which is difficult to obtain in a single-phase material.
DSS are suitable in applications where a combination of corrosion resistance, mechanical strength and weldability is required. DSS include both low alloy (lean) and highly alloyed (fat) variants. The lean ones are used in less severe applications where strength is more important than corrosion resistance. In highly corrosive applications fat DSS with PRE-values above 40, so called super DSS, are required.
Applications include heat exchangers, storage tanks, pressure vessels, umbilical tubing in the oil and gas industry (Figure 2), and various components in the urea industry. A critical stage of a urea plant is in the production of ammonium carbamate, which is a highly corrosive compound (Figure 3). The production of Urea is essential in modern agriculture and consequently for the survival of humankind. Table 1, which is far from exhaustive, shows a selection of DSS, their mechanical properties and their application areas.
An odd but very interesting application of DSS is in the preservation of the warship Vasa, which is on display in the popular Vasa museum in Stockholm.The ship foundered into her maiden voyage in the Stockholm ström (the city harbor) in 1628 but was salvaged in 1961 in a surprisingly well-preserved condition. Owing to the water pollution the ship has been contaminated with various chemicals, of which sulphur is a major concern because of the continual production of sulphuric acid when exposed to air. The old steel bolts used to keep the hull together are rusting rapidly and need to be replaced by bolts of a corrosion resistant material. Bolts manufactured from the hyper duplex stainless steel SAF 2707 HD™ provided by Sandvik have been selected for the purpose (Figure 4). Corrosion tests promise that the bolts will keep the hull together throughout this century - at least!
|Alloy designation||Rp1.0 (MPa)||Rm (MPa)||Elongation (%)||AISI||Application|
|3RE60||450||700–880||30||UNS S31500||Tubing for heat exchangers in environments with moderate chloride contents|
|SAF 2304®||450||630–820||25||UNS S32304||Tubing for heat exchangers in environments with moderate chloride contents, beams and torque transmitting shafts|
|LDX 2101®||450||650||30||UNS S32101||Storage tanks, pressure vessels and heat exchangers in environments with moderate chloride contents|
|LDX 2404®||540||745||25||UNS S82441||Storage tanks, architectural applications, structural components, desalination|
|Al 2003||450||620||25||UNS S32003||Pressure vessel applications|
|ATI 2102®||515||700||30||UNS S82011||Storage tanks, architectural applications, heat exchangers, tubing|
|UR™ 2202||450||650||30||UNS 32202||Water industry, hydropower plants|
|Sandvik SAF 2205™||480||680||25||UNS 32205||Production tubing oil & gas, chemical industry, heat exchangers|
|DP3W||550||800||UNS S39274||Heat exchangers, umbilical tubing|
|Sandvik SAF 2507™||640||800–1000||25||UNS S32750||Umbilicals, tubing for heat exchangers in refineries, chemical industry, process industry and oil & gas|
|Zeron® 100||550||750||25||UNS S32760||Tubing for heat exchangers in refineries, chemical industry, process industry and oil & gas|
|UR™ 2507||550||760||25||UNS S32750||Tubing for heat exchangers in refineries, chemical industry, process industry and oil & gas|
|SAFUREX®||650||800||25||UNS S32906||Various components in urea plants, e.g. stripper tubes, pool condenser tubes and carbamate condenser tubes|
|DP28W™||650||930||40||UNS S2808||Various components in urea plants, e.g. stripper tubes, pool condenser tubes and carbamate condenser tubes|
|Sandvik SAF 2707™||800||920–1100||25||UNS S32707||Tubular heat exchangers in aggressive acidic chloride-containing environments|
|Sandvik SAF 3207™||895||950–1150||25||UNS S33207||Umbilical tubing in very aggressive offshore applications|
This article was first published in Stainless Steel World Magazine in May 2017.