News and stories

All

18 oct. 2021 , Press release

We are proud to have been selected as supplier for this prestigious contract for nuclear tubes and pipes from a world leading low carbon energy company.

18 oct. 2021 , Feature

Matthew Castillo discusses ways to minimize the impact of today’s ‘new normal’ of ultra-competitive markets facing the oil and gas industry.

13 oct. 2021 , Press release

Tenaris and Sandvik extend nearly 20-year alliance with new five-year agreement for the supply of OCTG to serve the oil and gas market.

5 oct. 2021 , Feature

Sandvik acquires Accuratech Group which is a consolidation of three (3) smaller entities; Polyfil AG, Galvarex S.A and Polyflex s.r.l. consisting of in total 52 employees. Seller is the private equity firm OPP Beteiligungen AG.

27 sep. 2021 , Feature

SAF 2205™+ is generating lots of interest, read on to learn what the most frequently asked questions are and the answers.

23 sep. 2021 , Press release

As a consequence of current market conditions, Sandvik Materials Technology is introducing a price increase for its seamless tubing program across all regions globally.

15 sep. 2021 , Feature

Today, we congratulate Renata who was recently awarded for her work on a case study of high-temperature performance stainless steel

9 sep. 2021 , Feature

Machining components with metals can be expensive. The cost of materials to be used is a major factor, but there are lots of other things to consider, such as machining cost and utilization rates, tool consumption, and stoppages – whether planned or unplanned.

However, there are a few things that can be done to save you both time and money, such as choosing your materials wisely so that they are the best fit for the components you need to make. Here are five elements to consider when choosing your next machining material.

News

29 jun. 2021 , News

We are proud to announce the strategic partnership between Kanthal and HYBRIT, aiming at revolutionizing the steelmaking technology by developing an electric gas heating solution for the hydrogen used to make fossil-free sponge iron.

11 dic. 2020 , News

The Royal Swedish Academy of Engineering Sciences (IVA) is boosting its expertise and knowledge base with the addition of 42 new Fellows, including seven International Fellows. One of these Fellows is Eva Lindh-Ulmgren, Director of Materials Design at Sandvik Materials Technology.

27 nov. 2020 , News

Keith Hottle, director of quality and metallurgy for Sandvik Materials Technology has once again been presented with an award by ASTM International’s nonferrous and alloys committee, the Gary M. Kralik Distinguished Service Award.

15 oct. 2020 , News

Thanks to the use of a more energy-efficient lime in our steel mill in Sandviken, Sandvik has achieved an indirect reduction of 5,800 tonnes CO2 emissions per year.

23 sep. 2020 , News

Sandvik Materials Technology announces plans to expand its operations of precision medical wire and wire-based components to Tucson, Arizona, US.

25 jun. 2020 , News

NACE International recently awarded its 2020 Distinguished Organization Award to Sandvik Materials Technology, and Sandvik’s Ulf Kivisäkk was also awarded the NACE Technical Achievement Award.

27 may. 2020 , News

Göran Björkman, President of Sandvik Materials Technology (“SMT”), has been appointed Chairman of the Swedish Association of Industrial Employers (“Industriarbetsgivarna” in Swedish).

24 mar. 2020 , News

Sandvik is right now supporting the fight against the coronavirus by supplying precision wire to ventilator manufacturers.

Press releases

18 oct. 2021 , Press release

We are proud to have been selected as supplier for this prestigious contract for nuclear tubes and pipes from a world leading low carbon energy company.

13 oct. 2021 , Press release

Tenaris and Sandvik extend nearly 20-year alliance with new five-year agreement for the supply of OCTG to serve the oil and gas market.

23 sep. 2021 , Press release

As a consequence of current market conditions, Sandvik Materials Technology is introducing a price increase for its seamless tubing program across all regions globally.

7 sep. 2021 , Press release

The order encompasses supplying tubes for two heat exchangers used in a crude unit fractionator at a major refining company in the U.S. Gulf Coast

14 jun. 2021 , Press release

Sandvik and Jiuli Hi-Tech Metals have joined forces to manufacture Sanicro® 25 for high efficiency low emission coal-fired power generation

2 jun. 2021 , Press release

Sandvik Materials Technology, a business area of Sandvik, a developer and producer of advanced stainless steels, special alloys, titanium, and other high-performance materials, has celebrated a double anniversary by holding an American chestnut tree planting ceremony at its facilities in Pennsylvania.

28 abr. 2021 , Press release

Sandvik has won a contract to supply seamless coiled tubing made from its SAF 2507® super duplex stainless steel to a geothermal plant in Central America.

27 abr. 2021 , Press release

Sanicro® 825 (UNS NO8825) extends our growing Sanicro® portfolio of nickel alloys and austenitic stainless steels for aggressive wet, corrosive and high-temperature, pressure, acidic and seawater conditions.

Features

18 oct. 2021 , Feature

Matthew Castillo discusses ways to minimize the impact of today’s ‘new normal’ of ultra-competitive markets facing the oil and gas industry.

5 oct. 2021 , Feature

Sandvik acquires Accuratech Group which is a consolidation of three (3) smaller entities; Polyfil AG, Galvarex S.A and Polyflex s.r.l. consisting of in total 52 employees. Seller is the private equity firm OPP Beteiligungen AG.

27 sep. 2021 , Feature

SAF 2205™+ is generating lots of interest, read on to learn what the most frequently asked questions are and the answers.

15 sep. 2021 , Feature

Today, we congratulate Renata who was recently awarded for her work on a case study of high-temperature performance stainless steel

9 sep. 2021 , Feature

Machining components with metals can be expensive. The cost of materials to be used is a major factor, but there are lots of other things to consider, such as machining cost and utilization rates, tool consumption, and stoppages – whether planned or unplanned.

However, there are a few things that can be done to save you both time and money, such as choosing your materials wisely so that they are the best fit for the components you need to make. Here are five elements to consider when choosing your next machining material.

6 sep. 2021 , Feature

Meet the core of Sandvik’s nuclear division–our team. In our Nuclear Core series, we’ll introduce the faces behind this team and hear their insights on the nuclear industry: Peter Waller

1 sep. 2021 , Feature

The new control line calculator provides estimates of the highest permissible internal pressures for control lines of certain sizes and Sandvik Materials Technology grades.

11 ago. 2021 , Feature

Today, we congratulate Greg Mancuso on his 50th year with Sandvik! We offer our congratulations as you celebrate this significant anniversary with us.

News archive