News and stories

Kaikki

15 loka 2020 , Uutiset

Thanks to the use of a more energy-efficient lime in our steel mill in Sandviken, Sandvik has achieved an indirect reduction of 5,800 tonnes CO2 emissions per year.

13 loka 2020 , Ominaisuus

At Sandvik, ultra-fine wire - thinner than a human hair - is manufactured. This is used in medical technology components that both save and improve people's lives - and contribute to more efficient healthcare.

30 syys 2020 , Ominaisuus

Over the last 15-20 years, a new design for a smaller-scale option for nuclear energy has been in the works. Small modular reactors (SMRs) are defined as reactors using module factory fabrication, pursuing economies of series production and short construction times.

29 syys 2020 , Ominaisuus

Sandvik was one of the sponsors in Impact Coatings’ participation in the 24-Hour Hydrogen Challenge on September 28-29.

23 syys 2020 , Uutiset

Sandvik Materials Technology announces plans to expand its operations of precision medical wire and wire-based components to Tucson, Arizona, US.

10 syys 2020 , Ominaisuus

Sanicro® 35 is the latest grade addition to our growing portfolio of nickel alloys and austenitic stainless steels. This super-austenitic grade is unique because it bridges the performance gaps between stainless steels and higher cost nickel alloys.

7 syys 2020 , Ominaisuus

Recycling products from our production is of great importance and in line with Sandvik's sustainability goals. One of these initiatives is the handling and recycling of slag from steelmaking, which has resulted in a 100% possible reuse of the electric arc furnace slag used in the manufacture of rock drill steel.

3 syys 2020 , Ominaisuus

At Sandvik, we are committed to using engineering and innovation for more sustainable business. We believe one of the many ways to pursue sustainability is through natural and renewable energy sources, such as geothermal energy.

Uutiset

15 loka 2020 , Uutiset

Thanks to the use of a more energy-efficient lime in our steel mill in Sandviken, Sandvik has achieved an indirect reduction of 5,800 tonnes CO2 emissions per year.

23 syys 2020 , Uutiset

Sandvik Materials Technology announces plans to expand its operations of precision medical wire and wire-based components to Tucson, Arizona, US.

25 kesä 2020 , Uutiset

NACE International recently awarded its 2020 Distinguished Organization Award to Sandvik Materials Technology, and Sandvik’s Ulf Kivisäkk was also awarded the NACE Technical Achievement Award.

27 touko 2020 , Uutiset

Göran Björkman, President of Sandvik Materials Technology (“SMT”), has been appointed Chairman of the Swedish Association of Industrial Employers (“Industriarbetsgivarna” in Swedish).

24 maalis 2020 , Uutiset

Sandvik is right now supporting the fight against the coronavirus by supplying precision wire to ventilator manufacturers.

20 maalis 2020 , Uutiset

Sandvik Materials Technology has received large orders for advanced tubes for the energy segment.

5 maalis 2020 , Uutiset

To be an innovative business partner for our customers we aim to include sustainability in every aspect of our business. For us, that means integrating sustainability throughout the entire value chain – from research to final product.

27 helmi 2020 , Uutiset

The 26th edition of Medical Fair India 2020 will be launched from 5 to 7 March 2020 at the Bombay Convention and Exhibition Centre in Mumbai. It is India's leading healthcare exhibition, conference and business platform.

Lehdistötiedotteet

25 elo 2020 , Lehdistötiedote

Sanicro® 35, the latest addition to Sandvik’s growing Sanicro® portfolio of nickel alloys and austenitic stainless steels, offers exceptional high performance, strength and corrosion-resistance at a wide range of temperatures.

5 elo 2020 , Lehdistötiedote

Sandvik has appointed Jari Ponsiluoma as Product Manager for Heat Exchanger and Fertilizer, Tube, EMEA.

24 helmi 2020 , Lehdistötiedote

Sandvik has won the first large scale stainless steel umbilical tube order in Brazil’s pre-salt Mero oilfield.

30 tammi 2020 , Lehdistötiedote

To increase the availability of its high-quality seamless stainless tube, add flexibility for introducing new grades and strengthen regional service, Sandvik is adding a new cold finishing tube manufacturing line at its Mehsana Mill, in Gujarat western India, to be inaugurated January 30, 2020. The new high-tech line, mainly aimed at the production of heat exchanger tubing and for other demanding industrial applications, will double Mehsana’s cold-working capacity and thus allow for swifter delivery times across the Asia Pacific region.

20 marras 2019 , Lehdistötiedote

Sandvik, the leading medical wire specialist, is adding stranding and coating capabilities to its production unit in Palm Coast, Florida. By doing so the company is stepping up focus on customizable wire solutions based on EXERA® high precision medical wire one step further. Sandvik is presenting its wire and wire-based solutions at Compamed 2019, Messe Dűsseldorf, 18-21 November.

8 marras 2019 , Lehdistötiedote

Sandvik has entered into a long-term agreement with Tenaris to supply Oil Country Tubular Goods (OCTG) following their award from the Abu Dhabi National Oil Company (ADNOC) in August 2019.

24 loka 2019 , Lehdistötiedote

Sandvik will be exhibiting at this year’s Stainless Steel World 2019 on stand C26. With the theme of ‘Solving Corrosion with Science’, the company will be highlighting grades, designs, quality and sustainability of products and how working with customers they can help their operations and businesses.

3 loka 2019 , Lehdistötiedote

Global engineering group Sandvik will showcase its cutting-edge 3D-printed stainless steel guitar at the upcoming Engineering Design Show on 16-17 October 2019 in Coventry, UK.

Julkaisut

13 loka 2020 , Ominaisuus

At Sandvik, ultra-fine wire - thinner than a human hair - is manufactured. This is used in medical technology components that both save and improve people's lives - and contribute to more efficient healthcare.

30 syys 2020 , Ominaisuus

Over the last 15-20 years, a new design for a smaller-scale option for nuclear energy has been in the works. Small modular reactors (SMRs) are defined as reactors using module factory fabrication, pursuing economies of series production and short construction times.

29 syys 2020 , Ominaisuus

Sandvik was one of the sponsors in Impact Coatings’ participation in the 24-Hour Hydrogen Challenge on September 28-29.

10 syys 2020 , Ominaisuus

Sanicro® 35 is the latest grade addition to our growing portfolio of nickel alloys and austenitic stainless steels. This super-austenitic grade is unique because it bridges the performance gaps between stainless steels and higher cost nickel alloys.

7 syys 2020 , Ominaisuus

Recycling products from our production is of great importance and in line with Sandvik's sustainability goals. One of these initiatives is the handling and recycling of slag from steelmaking, which has resulted in a 100% possible reuse of the electric arc furnace slag used in the manufacture of rock drill steel.

3 syys 2020 , Ominaisuus

At Sandvik, we are committed to using engineering and innovation for more sustainable business. We believe one of the many ways to pursue sustainability is through natural and renewable energy sources, such as geothermal energy.

25 elo 2020 , Ominaisuus

EXERA® fine medical wire from Sandvik is specifically developed to transmit, sense or stimulate signals within the body. Conditions such as Parkinson’s, epilepsy, essential tremors and obsessive-compulsive disorder (OCD) can be significantly improved with a neurostimulator.

21 elo 2020 , Ominaisuus

Our materials experts recently attended the SAE WCX Digital Summit to access the latest consumer metrics and regulatory standards in the automotive industry. We take a look at five trends that we think will pave the road for the future of automotive.

News archive