Den här sidan finns endast på Engelska

News and stories

Alla

17 dec 2018 , Nyhet

The search for an identifier that can trace steel throughout its value chain has kept researchers busy for many years. Extreme heat, mechanical processing, deformation and corrosion are some of the harsh environments that an identifier has to withstand. To find a solution, Sandvik and SSAB invited researchers, companies and institutes around the world for an innovation challenge.

15 nov 2018 , Nyhet

Congratulations to Bharat Energy Storage Technology (BEST), winner of Kanthal® Award 2018. The Indian start-up company was awarded for their pioneering work in sustainable energy technologies.

13 nov 2018 , Pressmeddelande

Increased AM capacity, industrial AM cases and market-leading OspreyTM metal powder range to be showcased at Formnext 2018

12 nov 2018 , Pressmeddelande

The company also continues to observe growth in Europe, the Middle East and Africa.

EMEA, 8 November 2018 – Sandvik, a developer and producer of advanced stainless steels, special alloys, titanium and other high-performance materials, will highlight its latest range of products and services for its growing EMEA customer base at the Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC) 2018 next week.

9 nov 2018 , Pressmeddelande

Sandvik, the leading medical wire specialist, is stepping up focus on customizable wire solutions for sensing and stimulation based on EXERA™ high precision medical wire at Compamed 2018, Messe Düsseldorf, 12-15 November. Hall 8A, booth no. S29.

1 nov 2018 , Nyhet

Sandvik has announced that TW Metals UK will be a preferred distributor for a range of products including Sandvik hydraulic & instrumentation tubing and high temperature piping products in England.

25 okt 2018 , Nyhet

Forskningsprojektet Swedish Metal ligger nu i startgroparna där SMT ingår tillsammans med SSAB och Högskolan i Skövde. Genom Artificiell Intelligens, Big Data och maskininlärning ska man genomföra omfattande, och för branschen, unika produktionsdataanalyser. Förhoppningen är att resultaten kan bidra till en mer effektiv och hållbar ståltillverkning.

Nyheter

17 dec 2018 , Nyhet

The search for an identifier that can trace steel throughout its value chain has kept researchers busy for many years. Extreme heat, mechanical processing, deformation and corrosion are some of the harsh environments that an identifier has to withstand. To find a solution, Sandvik and SSAB invited researchers, companies and institutes around the world for an innovation challenge.

15 nov 2018 , Nyhet

Congratulations to Bharat Energy Storage Technology (BEST), winner of Kanthal® Award 2018. The Indian start-up company was awarded for their pioneering work in sustainable energy technologies.

1 nov 2018 , Nyhet

Sandvik has announced that TW Metals UK will be a preferred distributor for a range of products including Sandvik hydraulic & instrumentation tubing and high temperature piping products in England.

25 okt 2018 , Nyhet

Forskningsprojektet Swedish Metal ligger nu i startgroparna där SMT ingår tillsammans med SSAB och Högskolan i Skövde. Genom Artificiell Intelligens, Big Data och maskininlärning ska man genomföra omfattande, och för branschen, unika produktionsdataanalyser. Förhoppningen är att resultaten kan bidra till en mer effektiv och hållbar ståltillverkning.

25 okt 2018 , Nyhet

Recent developments and discoveries in the offshore Eastern Mediterranean gas industry, specifically the Levant Basin, are providing significant opportunities for companies that can offer products capable of withstanding harsh environments.

19 okt 2018 , Nyhet

Sandvik hosted a technical day at our Milan headquarters, with a focus on heat exchangers. The event presented the perfect opportunity to meet with customers and people working in various industries including refineries inspection, maintenance and engineering.

17 okt 2018 , Nyhet

Come and see us at ADIPEC 2018, stand #3220, Abu Dhabi National Exhibition Centre Hall 3, and let’s discuss how we can add value to your business through purposeful innovation.

21 sep 2018 , Nyhet

Sandvik Materials Technology och SSAB gör gemensam sak för att hitta framtidens bästa idéer för hur stålprodukter ska kunna spåras genom hela sin livscykel.

Pressmeddelanden

13 nov 2018 , Pressmeddelande

Increased AM capacity, industrial AM cases and market-leading OspreyTM metal powder range to be showcased at Formnext 2018

12 nov 2018 , Pressmeddelande

The company also continues to observe growth in Europe, the Middle East and Africa.

EMEA, 8 November 2018 – Sandvik, a developer and producer of advanced stainless steels, special alloys, titanium and other high-performance materials, will highlight its latest range of products and services for its growing EMEA customer base at the Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC) 2018 next week.

9 nov 2018 , Pressmeddelande

Sandvik, the leading medical wire specialist, is stepping up focus on customizable wire solutions for sensing and stimulation based on EXERA™ high precision medical wire at Compamed 2018, Messe Düsseldorf, 12-15 November. Hall 8A, booth no. S29.

24 okt 2018 , Pressmeddelande

Sandvik and Jiuli Hi-Tech Metals are entering into a partnership for the supply of Sanicro® 25 high alloy, austenitic stainless-steel tube to specifically target the expanding market for low emission coal fired power generation.

21 sep 2018 , Pressmeddelande

A ‘Track and Trace’ service app that keep tabs on orders, from just before shipping through to delivery, has been launched by Sandvik. The app is a useful tool for the customer to free up time in their day-to-day purchasing operations.

14 sep 2018 , Pressmeddelande

Sandvik will be exhibiting at the World Congress on Powder Metallurgy in Beijing 16 – 20 September.

3 sep 2018 , Pressmeddelande

Sandvik’s business area Sandvik Materials Technology has secured several orders for advanced tubes related to the oil and gas industry.

Artiklar

11 okt 2018 , Artikel

There’s a high degree of optimism that the African oil and gas industry will see significant growth in the next few years as an increasing number of discoveries are identified and exploited.

2 okt 2018 , Artikel
Razor blade explainer

Looking for that perfect shave; sharp and accurate, yet smooth and gentle, with a razor blade that’s durable and doesn’t corrode? When you find that brilliant razor, the blade might very well be produced by Sandvik. And guess what – more than 80% of the steel that Sandvik delivers to razor blade manufacturers around the world is recycled; from old bridges, sinks, bikes and railway rails just to mention a few ingredients.

19 jun 2018 , Artikel

At Sandvik, we live and breathe industrial innovation. We search for smart solutions to some of the greatest material challenges, constantly exploring new ground to find more sustainable ways to use and produce resources.

23 mar 2018 , Artikel

From the few examples mentioned in this column, new methods of generating electricity will also require new materials solutions to deal with the environments they will work in.

14 feb 2018 , Artikel

Sandvik is a world-leading producer of metal powder with over 35 years’ experience in the area. Keith Murray is Business Development Manager for metal powder at business area Sandvik Materials Technology.

20 dec 2017 , Artikel

Sandvik has approximately 8,000 active patents and 2,700 engineers working at research centers all over the world. One of the most prominent research centers is in Sandviken, Sweden.

13 dec 2017 , Artikel

Sandvik Materials Technology’s gas atomized metal powders help facilitate a wide range of customer applications including metal injection molding (MIM) and additive manufacturing (3D printing). Indo-MIM, a supplier of precision-engineered products, has gained a competitive edge with high quality molds manufactured using Sandvik's metal powder Osprey®.

2 aug 2017 , Artikel

The coefficient in front of tungsten compensates for the fact that the atomic weight of tungsten is about twice that of molybdenum. Molybdenum has been used from the very beginning in DSS. It was used in 453S launched by Avesta Jernverk in 1930 and has been used in virtually all DSS ever since. However, it was not until the 1980’s when Sumitomo launched DP3 and Weir launched Zeron 100 that tungsten was used more systematically as an alloying element.

News archive