677 hits on ”all pages” in Materials center
Aromatic polyether-based thermoplastic polyurethanes (TPUs) are unique resins which exhibit excellent solvent resistance and biostability. We have developed processing techniques to allow the application of this material on our alloy offerings and it can be applied at thicknesses as thin as 2.5
Sulfone polymers are high-heat plastics with a clear advantage. These amorphous thermoplastics offer more toughness, strength and hydrolytic stability than many other transparent plastics. They withstand prolonged exposure to water, chemicals and temperatures – handling a broad range
We offer a variety of polyimide coatings that can be applied to all our alloy offerings. Polyimides are chosen in applications because of their excellent resistance to chemicals, superior abrasion resistance, and superior thermal performance. Because of this combination of features, they are
Bond TT is a high temperature thermoplastic polyamide bondcoat, that exhibits good bond strength after activation with heat at 170-180°C. Bond TT can also be activated with solvent. This allows windings that maintain their shape until permanently bonded with heat. The recommended solvent
Bond CJL is a high temperature thermoplastic polyester bondcoat, that exhibits good bond strength after activation with heat at 170-190°C. Bond CJL can also be activated with solvent. This allows windings that maintain their shape until permanently bonded with heat. The recommended solvents
Sandvik 10C28Mo2 is a martensitic stainless chromium steel developed for razor blade and knife applications with high demands on corrosion resistance. The carefully chosen chemical composition in combination with a very fine microstructure also provides a high hardness, good edge retention,
Sandvik 10C16Mo3V1 is an 8% chromium steel known for its good wear resistance properties and toughness. The grade is suitable for tools and knives in challenging applications, such as garden tools and harvest knives.
A Polyamide-imide insulation.
Poly 180B is a Thermal Class 180 polyurethane wire enamel that meets the requirements of NEMA MW1000, 82-C or 83-C (when applied with a Nylon overcoat, Poly 180B/Nylon). The Nylon top coat is applied to reduce the coefficient of friction during winding and/or insertion.
A modified polyester resin with additional Nylon overcoat.
Go to page: