Materialetype
Alle materialetyper
Austenitic stainless steels
Carbon steels
Cobalt-chromium alloys
Corrosion resistant alloys
Creep resisting alloys
Cryogenic
Duplex stainless steels
Elastic materials
Ferritic stainless steels
Free-cutting steels
Heat resisting alloys
High-purity alloys
High-temperature alloys
Hyper-duplex stainless steels
Lean duplex stainless steels
Machinability-improved steels
Martensitic stainless steels
Nickel alloys
Non-ferrous metals
Precipitation hardening alloys
Refractory metals
Stainless steels
Super-duplex stainless steels
Titanium grades
Vacuum arc remelting
Zirconium grades
Produktformular
Alle produktformularer
Bar and hollow bar
Billets
Strip steel
Tube and pipe, seamless
Wire
Wire insulations and coatings
Vigtig egenskab
Acetic acid general corrosion
Air oxidation resistance
Bending fatigue strength
Carburizing resistance
Corrosion fatigue
Creep strength
Crevice corrosion resistance
Cryogenic compability
Ductility
Edge properties
Elasticity
Erosion corrosion resistance
Formic acid general corrosion
General corrosion resistance
High strength
Impact fatigue strength
Impact strength
Low thermal expansion
Nitric acid general corrosion
Nitriding resistance
Pitting and crevice corrosion resistance
SCC resistance
SCC resistance in chloride environments
SCC resistance in H2S/Cl- environments
Soft magnetic properties
Spring properties
Sulphidation resistance
Sulphuric acid general corrosion
194 hits
Sortér efter
Sortér efter relevans
Sortér efter ASTM
Sortér efter EN no.
Sortér efter UNS
Sortér
Standard: ASTM 1095 | EN number 1.1274
A hardened and tempered carbon steel with very high tensile strength used for pad printing applications.
Standard: UNS S32750 | EN number 1.4410
A super-duplex (austenitic-ferritic) stainless steel characterized by excellent resistance to stress corrosion cracking, very high resistance to pitting and crevice corrosion, high resistance to general corrosion and very high mechanical strength.
Sandvik 316LVM (Adskillige tilgængelige produktformularer)UNS S31673 | EN number 1.4441
Sandvik 316LVM is a vacuum remelted, molybdenum alloyed, austenitic stainless steel and is used for implant and other medical applications. It is also suitable for the watch industry because of its absolute cleanliness and excellent polishing properties.
Standard: UNS S42000 | ASTM 420 | EN number 1.4021
A martensitic stainless chromium steel with low carbon content that after hardening is characterized by good corrosion resistance and high toughness.
Standard: UNS S31600, S31609 | ASTM 316, 316H | EN number 1.4436
A molybdenum-alloyed (min. 2.5%) austenitic stainless steel.
Sandvik 6R35 (Adskillige tilgængelige produktformularer)UNS s32100, S32100, S32109 | ASTM 321/321H, TP321, TP321H | EN number 1.4541, 1.4940
A titanium-stabilized austenitic stainless steel.
Sanmac® 304/304L (Adskillige tilgængelige produktformularer)UNS S30400, S30403 | ASTM 304, 304L, MT 304, MT 304L | EN number 1.4301, 1.4307
An austenitic stainless steel with improved machinability.
Sanmac® 316/316L (Adskillige tilgængelige produktformularer)UNS S31600, S31603 | ASTM 316, 316L, MT 316, MT 316L | EN number 1.4401, 1.4404
A molybdenum-alloyed austenitic stainless steel with improved machinability.
Sandvik 1C256 Produktformular: Tube and pipe, seamlessStandard: EN number 1.4724**
A ferritic chromium steel for high-temperature applications. Sandvik 1C256 is characterized by good resistance to reducing sulphurous gases and oxidation in air.
Sandvik 2C48 Produktformular: Tube and pipe, seamlessStandard: UNS S44600 | ASTM 446-2
A ferritic chromium steel for high-temperature applications. Sandvik 2C48 is characterized by good resistance to sulphidation in reducing atmospheres and very good resistance to oxidation.
