You are visiting:
Sandvik Materials Technology
Here you can access material datasheets for our wide range of alloys and materials. Contact us if you need more information about our materials.
A covered electrode of AWS 385-16 type with rutile-basic coating, used for welding of high-alloy austenitic stainless of UNS N08904 type, also known as 904L (e.g. Sandvik 2RK65).
A covered electrode with basic coating for welding of duplex (ferritic-austenitic) stainless steels of UNS S31803/S32205 type (e.g. Sandvik SAF 2205).
Sandvik 24.13.LR-16 (309/309L-16) is a covered chromium-nickel electrode with rutile-basic coating used for first-layer overlay welding of carbon or low-alloy steels. The low carbon content reduces the susceptibility to intergranular carbide precipitation and intergranular corrosion. It is also used for joining of dissimilar material. The coating for this electrode is of the American rutile type with a faster freezing rate over -17 Type of the same weld deposit chemistry.
A covered electrode of AWS 383-16 type with rutile-basic coating for welding of high-alloy austenitic stainless steels of UNS S08028 (e.g. Sanicro 28) and Alloy 825 type (e.g. Sanicro 41).
View datasheet for:
A covered electrode with basic coating for welding of nickel alloys and stainless steels, such as Sandvik 254 SMO, Sanicro 63, Alloy 625 and Alloy 825. It can also be used for dissimilar joining of stainless steels to nickel alloys and for overlay welding.
Several product forms available:
A covered electrode with basic coating for corrosion-resistant overlays on most low-alloy and stainless steels. It is also used for welding of alloys of Alloy 690 type (e.g. Sanicro 69) and dissimilar joints.
A covered electrode with basic coating for welding of dissimilar joints of stainless steel and nickel alloys as well as welding of NiCrFe alloys and 9% Ni steels.
Sandvik 19.12.3.L T0 (Sandvik 316/316L) is a chromium-nickel-molybdenum flux core electrode for welding of low carbon 18% Cr/10% Ni/ 2%Mo austenitic stainless steels of type 316.
Sandvik 19.13.4.L–T1 (317/317L-T1) is a chromium-nickel-molybdenum flux core electrode for welding of low carbon 18% Cr/10% Ni/ 3%Mo austenitic stainless steels of type 317.
Go to page:
3 (This page)
Sandvik is an engineering group in materials technology, metal-cutting, and mining and rock excavation.Visit Sandvik Group's website
Copyright © Sandvik AB; (publ)SE-811 81 Sandviken, SwedenPhone: +46 26 26 00 00