Here you can access material datasheets for our wide range of alloys and materials. Contact us if you need more information about our materials.
Sandvik SX is a high silicon containing austenitic stainless steel developed for use in concentrated sulfuric acid. The grade is characterized by:
Sanicro® 48 is an austenitic nickel-base alloy for highly corrosive OCTG downhole applications. The grade is characterized by:
Sanicro® 35 is an alloy combining the best features of a super austenitic stainless steel and a nickel alloy. The grade has excellent corrosion resistance, for service in sea-water applications and other highly corrosive environments.
Aromatic polyether-based thermoplastic polyurethanes (TPUs) are unique resins which exhibit excellent solvent resistance and biostability. We have developed processing techniques to allow the application of this material on our alloy offerings and it can be applied at thicknesses as thin as 2.5 microns.
Sulfone polymers are high-heat plastics with a clear advantage. These amorphous thermoplastics offer more toughness, strength and hydrolytic stability than many other transparent plastics. They withstand prolonged exposure to water, chemicals and temperatures – handling a broad range of end-use temperatures from -40°C to 204°C (-40°F to 400°F).
A molybdenum-alloyed high-strength vacuum remelted austenitic stainless steel with excellent microcleanliness and structural homogeneity. The grade is part of the Sandvik Exera® medical materials range.
Sanicro® 42 is an austenitic nickel-base alloy for highly corrosive OCTG downhole applications. The grade is characterized by:
A polyurethane wire enamel with additional Polyamide overcoat.
An enamel is made from vinyl acetal resins.
A high-temperature thermoset epoxy bondcoat.
Go to page:
Sandvik is an engineering group in materials technology, metal-cutting, and mining and rock excavation.Visit Sandvik Group's website
Copyright © Sandvik AB; (publ)SE-811 81 Sandviken, SwedenPhone: +46 26 426 00 00